Analisis Kinerja Kondensor Sebelum Dan Sesudah Overhoul Di PT. Indonesia Power UJP PLTU Lontar Banten Unit 3
Article Sidebar
Main Article Content
Abstract
In this paper, described the condenser kinerjance analysis before and after overhoul. Plant is used as object of research is power plant PT. Indonesia Power UJB Lontar Banten Unit 3. The power plant consists of three units, the capasity each of 315 MW. Power plant Lontar Banten works by using cycle rankine. Condensers used are surface condenser, where the steam and cooling water separately. The efficiency of the condenser is affected by the value of heat rate, heat condenser, a decrease in the average logarithmic temperature, cleanliness factor. Condenser heat is calculated by heat balance approach and condenser heat rejection. The data used in this study is data operations in 2015 (Juni 2015 and Oktober 2015). From the analysis of the obtained results that the increased efficiency of the condenser by 10% from 43.6% to 53.6% after the overhoul. Increasing the efficiency of the condenser is affected by the decrease in heat rate 5.32 %, decrease condenser heat 7.03 %, decrease the average temperature logarithmic 8.11 %, improved cleanliness factor of 22.91 %. From these results indicate that the activity overhoul effectively improve the efficiency of the condenser
Downloads
Article Details
References
ASME PTC 12.2 (Revision Of PTC 12.2 – 1998 (R2007) Steam Surface Condensers, 2010
Cengel Y.A, and Boles M.A., Thermodynamics An Engineering Approach, Mc Graw Hill International Edition, Fifth Edition. 2012,
Cengel, Y.A and Turner, Fundamental of Thermal Fluid Sciences, Mc.Graw Hiil International Edition, 2001
Holman J.P, Heat Transfers, Tenth Edition, McGraw Hill Highger Education, USA, 2010.
Kakas S., Liu H. and Pramuanjarouenkij A, Exchangers, Selection, Rating, and Thermal Design, Third Edition, CRC Press, USA, 2012
Kuppan Thulukkanam, Heat Exchanger Design Handbook, Second Edition, CRC Press, 2012
Kreith F., Raj M. Manglik R.M., Bohn M.S., and Mark S. Bohn, Principles of Heat Transfer, Seventh Edition, Cengage Learning, USA, 2011
Moran M.J., Shapiro H.N, Boettner, D.D , and Bailey M.B, Fundamentals of Engineering Thermodynamics, Eighth Edition; John Wiley & Sons, Inc, 2014
Nag P.K., Power Plant Engineering, Thied Edition, Tata Mac.Graw Hill, New Delhi India, 2008