Perkembangan Teknologi Alat Berat di Era Konstruksi 4.0
Article Sidebar
Main Article Content
Abstract
The development of construction 4.0 is now increasing, the challenges that must be faced are increasingly diverse and complex. One of the significant challenges is the problem of increasing productivity, this problem occurs because of the increasing demand for infrastructure. The use of machine construction technology provides new opportunities for more efficient, smart and connected work. Several previous studies have discussed heavy equipment technology in the construction industry, such as analysis of the productivity of heavy equipment working time, implementation of construction automation, comparison of the productivity of manual and automated construction projects. The purpose of this study is to find out whether the development of heavy equipment adapts to the need for technological developments in the construction era 4.0. This study uses simple stages where after the literature is obtained, an analysis of the results of the literature obtained is carried out and validation is carried out by observing the object of research. Based on the analysis, it was concluded that 50% of the development of heavy equipment had matched the need for technological developments in the construction era 4.0. So this is a positive signal in increasing productivity which is the main problem in construction projects. Then the hope for the future is that all providers and users in the construction industry will always make continuous improvements to achieve an integrated infrastructure in the future.
Downloads
Article Details
References
K. J. Santoso, K. A. Wijaya dan H. P. Chandra, “Potret Industri Konstruksi Di Surabaya Dalam Masa Pandemi Covid-19” Jurnal Dimensi Pratama Teknik Sipil, vol. 1, 2021.
K. P. U. "Pengembangan Pasar dan Daya Saing Industri Konstruksi Nasional Dalam Menghadapi Masyarakat Ekonomi ASEAN Pasca 2015," Kementerian Pekerjaan Umum, 2013.
J. Wells, “The Construction Industry in the Context of Development: A New Perspective,” Habitat International, vol. 8, no. 3-4, pp. 9-28, 1984.
Suhartono, “Sektor Konstruksi Nasional Dan Perubahan Undang-Undang Nomor 18 Tahun 1999 Tentang Jasa Konstruksi,” Jurnal Ekonomi & Kebijakan Politik, vol. 3, pp. 91 - 107, 2012.
M. Wimala dan K. Imanuela, “Perkembangan Internet of Things di Industri Konstruksi,” Journal Of Sustainable Construction, vol. 1, no. Vol. 1 No. 2 (2022): Journal of Sustainable Construction, 2022.
S. Pusposutardjo, “Peranan Teknologi Konstruksi dalam Menunjang Pelaksanaan Operasi dan Pemeliharaan yang Berkelanjutan,” Agritech: Jurnal Fakultas Teknologi Pertanian UGM, vol. 14, pp. 1-6, 1994.
H. Shafei, A. R. Radzi, M. A. dan R. A. Rahman, “Construction 4.0 Technologies and Decision-Making: A Systematic Review and Gap Analysis,” Buildings, vol. 12, 2022.
M. I. Sangadija, E. R. Ahadianb dan M. Darwin, “Analisis Produktivitas Waktu Kerja Alat Berat Pada Pembangunan Lanjutan Reklamasi Dan Jalan Kawasan Kayu Merah-Kalumata,” Journal of Science and Engineering, vol. 4, pp. 59-71, 2021.
H. G. Soeparto dan B. Trigunarsyah, "Industri Konstruksi Indonesia: Masa Depan Dan Tantangannya," 2005.
I. D. Mohd. Aripin, E. M. Ahmad Zawawi dan Z. I. , “Factors Influencing the Implementation of Technologies Behind Industry 4.0 in the Malaysian Construction Industry,” MATEC Web of Conferences, no. MATEC Web Conf. Volume 266, 2019 International Conference on Built Environment and Engineering 2018 - “Enhancing Construction Industry Through IR4.0” (IConBEE2018), p. 6, 2019.
R. R. N. P., “Implementasi Otomatisasi Konstruksi Pada Industri Konstruksi Di Surabaya,” Institut Teknologi Sepuluh Nopember, 2016.
H. J. Natalius dan Y. Wantigo, “Studi tentang inovasi teknologi alat berat dalam industri konstruksi,” Petra Christian University., 2004.
Hermawan dan I. , “Metodologi Penelitian Pendidikan (Kualitatif, Kuantitatif dan Mixed Method),” Hidayatul Quran, no. ISBN : 978-623-91984-0-4, 2019.
Sugiyono, “Metode Penelitian Kuantitatif, Kualitatif dan R&D,” Bandung: PT Alfabet, 2016.
M. Casini, “Construction 4.0 Advanced Technology, Tools and Materials for the Digital Transformation of the Construction Industry,” Elsevier, 2021.
G. X. Dongsheng Wang, “Introduction to Intelligent Construction Technology of Transportation Infrastructure,” Springer, 2022.
H. Seaton, “The Construction Technology Handbook: Making Sense of Artificial Intelligence and Beyond,” John Wiley & Sons, Ltd., 2020.