Pemeliharaan Preventif Pompa Vakum STG PLTGU Unit 1 Tambak Lorok Semarang

Article Sidebar

PDF
Published: Nov 14, 2018
DOI: https://doi.org/10.33322/powerplant.v6i2.397
Keywords:
pompa vakum PLTGU kondenser perawatan preventif komponen - komponen pompa kerusakan pompa

Main Article Content

Win Alfalah
STT PLN

Abstract

To increase the efficiency of condensation on the PLTGU (Gas and Steam Power Plant) a low pressure in condenser is needed, so steam moves faster toward the condenser because high pressure difference. To reduce pressure in the condenser, a vacuum pump is used. Vacuum pump engine maintenance in this study is in form of preventive maintenance (repairs carried out with the schedule scheduled by the component factory and/or by user experience), etc. This is because maintenance that is considered to be affordable both in terms of cost and field implementation in our country for power plants currently is preventive maintenance. What will be discussed here is preventive maintenance at the vacuum pump unit 1 of PT Indonesia Power PLTGU Tambak Lorok, Semarang. This discussion covers details of the vacuum pump preventive maintenance of each components, causal relationship of damage to causes, detailed analysis of the damage causes to vacuum pump components, etc.

Downloads

Download data is not yet available.

Article Details

How to Cite
Alfalah, W. (2018). Pemeliharaan Preventif Pompa Vakum STG PLTGU Unit 1 Tambak Lorok Semarang. JURNAL POWERPLANT, 6(2), 117–138. https://doi.org/10.33322/powerplant.v6i2.397
Issue
Vol. 6 No. 2 (2018): JURNAL POWER PLANT
Section
Articles

References

[1] Anonim. 1999. Liquid Ring Pump MV and MVP Design Installation, Operation and Maintenance Manual. New York: Graham Co.
[2] Anonim. 2014. Instruksi Kerja Mengoperasikan Pompa Vakum PLTGU. IK.SMG.Q.02.67. Semarang: PT Indonesia Power UP Semarang.
[3] Anonim. PT Indonesia Power UP Semarang. (online). (https://www.indonesiapower.co.id/id/produk-dan-layanan/produk/Pages/Unit-Pembangkitan-Semarang.aspx, diakses 5 Juni 2018: 08.15 WIB)
[4] Anonim. Cat Pumps (online). (http://www.catpumps.com/preventive-maintenance.asp), diakses pada 21 September 2018 7.50 WIB.
[5] Baringbing, H. M. & Hazwi, M. (2013). Analisa Kerusakan Pompa Vertikal Tipe Tait Model 15 BCH-3 dengan Kapasitas 150 L/S di PDAM Tirtanadi Sunggal. Jurnal e-Dinamis, 6(2), 56-60.
[6] Butler, S. W., Ringwood, J. V., MacGearailt N. (2009). Prediction of Vacuum Pump Degradation in Semiconductor Processing. Preprints of the 7th IFAC Symposium on Fault Detection, Supervision and Safety of Technical Processes, 1(1), 1635-1640.
[7] Cheung, Wan-Sup. (2015). Predictive Diagnosis and Preventive Maintenance Technologies for Dry Vacuum Pumps. Jurnal Vacuum Magazine (The Korean Vacuum Society), 2(1), 31-34.
[8] Denver, Gardner. How a Liquid Ring Vacuum Pump Works. (online). (http://www.gdnash.com/liquid-ring-vacuum-pump-operation/, diakses 8 Juni 2018: 08.15 WIB)
[9] Ganapathy, A. U., Sainath K. (2014). Vibrational Analysis a Key for Pump Maintenance-Case Study. International Journal of Modern Engineering Research (IJMER), 4(3), 58-64.
[10] Gusniar. I. N. (2014). Optimalisasi Sistem Perawatan Pompa Sentrifugal di Unit Utility PT. ABC. Jurnal Ilmiah Solusi, 1(1), 77-86.
[11] Nandiroh, S. (2006). Penentuan Waktu Perawatan untuk Pencegahan pada Komponen Kritis Cyclone Feed Pump Berdasarkan Kriteria Minimasi Down Time. Jurnal Ilmiah Teknik Industri, 5(1), 39-44.
[12] Rao, S. S., Vikas, V. C., Rao, M. R. (2012). Preventive Maintenance and Fault Diagnosis of Pump Motor Bearings. IOSR Journal of Mechanical and Civil Engineering (IOSRJMCE), 2(6), 17-20.
[13] Totok I. 2016. Analisa Jumlah Energi yang Terserap pada Tiap Tingkatan Pipa - Pipa HRSG Unit 2.1 pada PLTGU Blok 2. Semarang: POLINES Semarang.